Teletronics EzBridge 5800 User Manual
Page 12
Note: Again the IP address must be in the format of 192.168.1.x. Where the value of X should be ranged from 1 to 254
excluding 99.
5. Click
OK, and then restart the system.
2.5 Windows
2000
1. Click
Start on the taskbar and choose Network and Dial-up Connection from the submenu of Settings.
2. Double-click
the
Local Area Connection open the Local Area Connection Properties box.
3. Select
the
Internet Protocol (TCP/IP) for your network card, and then click Properties to open the Internet
Protocol (TCP/IP) Properties dialog box.
4. Under
the
General tab, choose Use the following IP address, and then specify an IP address. For example,
type in 192.168.1.X in the IP Address (where X is any free IP number from 1-254, excluding 99) area and
255.255.255.0 in the Subnet Mask area.