Teletronics EzBridge 5800 - Manual (Page 4)

Introduction
The 802.11b EzBridge 5800 aims to fill in the gap between regular 2.4 GHz and that of 5.8 GHz equipment. It
combines the ease and reliable 802.11b equipment with that of the less crowded 5.8 GHz frequency band. It is the
perfect solution to quickly add more equipment in saturated 2.4 GHz environment. The EzBridge 5800 is a cost
effective solution that is easy to install and operate. To get the most out of this product, please read this manual
carefully.
1.1 Features
• 802.11b Wi-Fi compliant
• Quick and easy to install
• Works with any device that has an Ethernet port
• LED indicators show unit operating status
• FCC Certified for use with YDI amplifiers and outdoor antennas with the Diamond WLAN Card
• Web-based configuration screen of EzBridge 5800 enables fast and easy setup
• Supports RTS threshold control for better throughput
• Wireless data encryption with 64 and 128 bits encryption for security
• One-year
warranty
1.2 Specifications
EzBridge and PCMCIA Card
Data Rates Supported 1, 2, 5.5, and 11 Mbps
Network Standard IEEE 802.11b
Uplink 10BaseT Ethernet
Frequency Band 2.4 to 2.497 GHz (subject to local regulations)
Network Architecture Types Infrastructure
Wireless Medium Direct Sequence Spread Spectrum (DSSS)
Media Access Protocol
Carrier sense multiple access with collision avoidance
(CSMA/CA)
Modulation
• DBPSK
@1 Mbps
• DQPSK @ 2 Mbps
• CCK @ 5.5 and 11 Mbps
Operating Channels
• 11 channels (US, Canada))
• 13 channels (ETSI)
• 4 channels (France)
• 14 channels (Japan)