Commands – Teletronics EzBridge 5800 User Manual
Page 24
The factory gateway default address is 192.168.1.1
Device name
This is the name that the bridge will use to identify itself to external configuration and IP address programs. This is not
the same as the SSID. It is okay to leave this blank if you are not using these programs.
Allow upgrade uploads
This option determines if the EzBridge can be re-flashed with a firmware into the on board memory.
Cloning bridge
If enabled the MAC Address from the first Ethernet client that transmits data through the EzBridge will be used. This
will mean that the client MAC address will become the alias address to the Bridge.
Commands
This section has functions that will allow the EzBridge to Reboot and Reset the system configuration to factory default.
Reboot bridge
This function will restart the EzBridge.
Reset to factory defaults
This function will reset all software setting back to factory default values.