Teletronics EzBridge 5800 - Manual (Page 5)

Receive Sensitivity
• 1 Mbps: –94 dBm
• 2 Mbps: –91 dBm
• 5.5 Mbps: –87 dBm
• 11 Mbps: –84 dBm
Available Transmit Power Settings 100 mW / 200 mW
Range
(typical @ 99-mW transmit power
setting, including 1.95 dBi diversity
dipole antenna)
Indoor:
• 50 m (164 ft) @ 11 Mbps
• 110 m (360 ft) @ 1 Mbps
Outdoor:
• 240 m (787 ft) @ 11 Mbps
• 600 m (1968 ft) @ 1 Mbps
EMC Certification
FCC 47CFR15 subpart C (15.247) and Class B device
ETSI 300-328/301-489-17 (General EMC requirement for RF
equipment)
Antenna Two soldered dipole antennas
Security IEEE 802.11 WEP (Wired Equivalent Privacy)
Encryption Key Length 64-bit, 128-bit
Filter MAC Address Filtering
Status Indicators LED Light provide status of: Power, Wireless LAN, and Ethernet.
Automatic Configuration Support DHCP client
Remote Configuration Support
HTTP for configuration
TFTP for firmware upgrade
Dimensions WxHxD (mm/inch) 161mm x 30mm x 119mm (6.3 ‘’x1.2 ‘’x4.7’’)
Weight 195g (6.87oz)
Environmental
• Operating temperature: 0 o
C to 40
o
C (32
o
C to 104
o
C)
• Storage temperature: -20 o
F to 70
o
F (-4
o
F to 158
o
F)
• Humidity: 10 to 90% (non-condensing)
Input Power Requirements DC 5V 2A
One year