Teac MD-CD1MKIII - Manual (Page 34)

34
TASCAM MD-CD1MKIII
repeat function is off and the current track is the last
track on the disc or in the program).
Stop
When MP3 or WAV playback fails, the unit stops
playback.
NOTE
If MP3 or WAV playback fails during dubbing mode, the
unit stops playback regardless of the MP3 ACTION setting.
MD group playback
The MD-CD1MKIII allows MD tracks to be divided into
groups.
When the Group playback mode is on, only those tracks in
the selected group are available for playback. This is like
playing a disc which only contains the tracks in a selected
group. Accordingly, Program playback and Repeat
playback only function within the group.
Group playback setting
1 Set the remote control master to MD, and press the
DIR/GROUP button.
GRP ON
or
GRP OFF
will be shown in the display.
When the DIR/GROUP button is pressed, the current
setting is changed. For example, if the Group playback
mode is off, when the button is pressed, the mode is
turned on and GRP ON is displayed.
You can also use the
GRP MODE?
option in the
PLAY sub-menu of the MD menu to turn this mode
on or off.
2 During Stop mode, the MD SEARCH button on the
remote control can be used to select a group.
Press the MD SEARCH button, and the number of
the selected group will be shown on the display,
followed by the group title.
NOTE
When Group mode is on, regardless of the group, tracks •
which are not in the group cannot be played.
When Group mode is turned on, recording is not
•
possible.
Creating and deleting groups
Using the
EDIT
sub-menu of the MD menu, groups
can be created or deleted. Refer to “Creating a group”
and “Deleting a group” in the “MiniDisc editing” section
starting on page 43.
Titling groups
You can title the groups using the
TITLE
submenu of
the MD menu. Refer to “Group title input” on page 45.
7 – CD and MD Playback