Teac MD-CD1MKIII - Manual (Page 15)

TASCAM MD-CD1MKIII
15
f g h j k l ; z
x
c v b n m
e r t y u i
o p a s d
CD Operation
e KEY button / Indicator
When this button is pressed, the Indicator light goes
on and the Key Change function is turned on, allowing
you to change the musical key of Compact Disc
playback.
Refer to “Changing the key of playback” on page 32.
Even when the power is turned off, the key change
setting is retained.
r CD Tray
Compact Discs are placed here for loading.
t Ô /Â button
In normal mode, this button is used to skip back a
track or for review playback (search).
When playback is stopped, if this button is pressed
once, the previous track is selected; if it is pressed
continuously, the tracks are skipped backward at high
speed.
During playback, if this button is pressed once, the
beginning of the current track is cued, and playback
restarts; if it is pressed continuously, review playback
(search) is performed.
y ¯ / button
In normal mode, this button is used to skip forward a
track or for cue playback (search).
When playback is stopped, if this button is pressed
once, the next track is selected; if it is pressed
continuously, the tracks are skipped forward at high
speed.
During playback, if this button is pressed once, the
beginning of the next track is cued, and playback
begins; if it is pressed continuously, cue playback
(search) is performed.
u CD button/indicator
When this button is pressed, the indicator goes on,
CD becomes the display master, and CD deck and disc
information (such as settings and time) are shown on
the display.
Even when the power is turned off, the display master
setting is retained.
i CD MENU button
This turns the CD Menu mode on or off. In CD Menu
mode, the CD indicator light flashes, CD menu options
are indicated on the display, and settings can be
performed.
NOTE
If the •
CD MENU button is pressed when the display
master is MD, the MD indicator stays lit, while the CD
indicator flashes.
If the
• CD MENU button is pressed when the display
master is CD (CD indicator ON), the CD indicator will
begin flashing.
o PITCH Control/Indicator
Push this control to turn the pitch control function on
or off. When it is on, the indicator lights up, and pitch
can be adjusted between –50% and +16% by turning
the control. Even when the power is turned off, the
pitch control ON/OFF setting is retained.
p STOP (ª) button
During CD playback, press this button to stop
playback. When this button is pressed during
dubbing operation, both the MD and CD decks stop
simultaneously.
a PLAY (Á) button
Press this button to start CD playback when the CD
deck is in stop or standby mode.
When this button is pressed during dubbing standby
mode, the CD deck starts playback, the MD deck starts
recording, and dubbing begins.
s READY (π) button
When this button is pressed during playback or while
stopped, the CD deck enters standby mode.
d OPEN/CLOSE (ø) button
Press this button to open or close the CD tray.
4 – Names and Functions of Parts