Teac HS-8 Firmware V1.40 - Manual (Page 8)

8
TASCAM HS-8
HS-8
Addendum to the Owner’s Manual
Importing multiple mono files that have been recorded with
another device as a single take
Follow the procedures below to import multiple mono files that have been
recorded with another device to this unit as a single take.
NOTE
the unit to treat as a single take have the same sampling frequency, bit depth
and audio length.
1. Name the mono files that you want to be recognized as a single take
using the following format.
[mono take name]_[2-digit track number].wav
Example:
Scene001-T001_01.wav
Scene001-T001_02.wav
Scene001-T001_03.wav
Scene001-T001_04.wav
Scene001-T001_05.wav
Scene001-T001_06.wav
Scene001-T001_07.wav
Scene001-T001_08.wav
2. Copy the above files to the CF card by following the procedures in the
“Preparations before importing” section of “Importing files recorded by
other devices” on page 4 of the HS-8 firmware v1.20 Instruction Manual.
3. Rebuild the folder by following the procedures in the “Preparing imported files
for use with this unit (rebuilding the folder)” section of “Importing files recorded
by other devices” on page 4 of the HS-8 firmware v1.20 Instruction Manual.
Printed in China