Hs-8 – Teac HS-8 Firmware V1.40 User Manual
Page 2

2
TASCAM HS-8
HS-8
3.
When the confirmation message appears, touch the OK button.
Current take list information is output to a file in the current folder of
the current project. The file is named with this format: “ name>_ NOTE If a file with the same name already exists, a message confirming that you  want to overwrite it will appear. Touch the OK button to overwrite that file.  ONLINE fader setting value display added ONLINE fader setting value display has been added to the CHANNEL SETUP  screens.  CH1 SETUP screen L/R SETUP screen NOTE  iSince the system uses only one ONLINE fader setting, the same setting value is  linked on all channel pages and the L/R page.   iThe ONLINE fader can be operated when a TASCAM RC-HS20PD (sold sepa- rately) is connected. It cannot be used with just the main unit. If no RC-HS20PD  is connected, the ONLINE fader setting value will be 0dB.  Metering Point switching function added A function that allows you to set the meter display to before or after the  ONLINE fader has been added to the METER SETUP and CHANNEL SETUP  screens.    p METER SETUP screen  Metering Point Pre Fader (default): The meters show the levels before the ONLINE fader.    p CHANNEL SETUP screens CH1 SETUP screen L/R SETUP screen METER button  You can switch whether the meters show the levels before or after the  ONLINE fader. Touch the left button to have the meters show the levels  before the ONLINE fader. Touch the right button to have the meters show the  levels after the ONLINE fader. NOTE  iBefore this function was added, the Metering Point was fixed to the Post Fader  setting. Be aware that with the addition of this function, the default Metering  Point setting is now Pre Fader.   iSince the system uses only one Metering Point setting, the same setting value is  linked on all channel pages and the L/R page.  iThe ONLINE fader can be operated when a TASCAM RC-HS20PD (sold sepa- rately) is connected. It cannot be used with just the main unit.
Post Fader: The meters show the levels after the ONLINE fader.
