Teac DR-1 - Manual (Page 31)

TASCAM DR-1
31
12–Loop, Repeat and Single Playback
In ordinary playback mode, once playback starts, it
will stop when the end of the last track in the current
playback area is reached (or you press the STOP key).
By following the instructions in this chapter, however,
you can also make the DR-1 loop a section of a track
that you choose, repeat the entire sequence of tracks
in the current playback area, play a single track
repeatedly or play a single track once and stop.
With this function, you can continuously repeat the
playback of a selection that you make (loop playback).
1 Press the IN/OUT key during playback to set the
point when you want to start loop playback. The
current position is set as the IN point.
2 Press the IN/OUT key at the point when you want
loop playback to stop. The current position is
set as the OUT point, and loop playback begins
between the IN and OUT points.
The current positions of the IN and OUT points are
shown by the and icons that appear below the
playback position display bar in the lower part of the
Home Screen. During loop playback the indicator
also appears.
To stop loop playback, press either the LOOP key or
the IN/OUT key.
If you press the LOOP key, the loop interval settings
are saved, and if you press the LOOP key again loop
playback of the set interval begins again.
If you press the
IN/OUT key, the loop interval settings
(IN point and OUT point settings) are canceled.
NOTE
Accurate assignment of IN and OUT points is not always
possible for variable bit rate (VBR) MP3 files.
Loop playback
Repeat and single track playback modes
You can set the DR-1 to repeatedly play the current
track or all tracks in the playback area, as well as play
just a single track once.
1 Press the
MENU key to open the Menu Screen.
Select
PLAY MODE
and press the ¥/π key.
2 Select the
REPEAT
item to set the playback mode
to one of the options describe at right.
• OFF:
All tracks in the playback area are played in sequence
one time. (This setting is the ordinary playback mode.)
• SINGLE:
The selected track is played once without repeating.
The icon appears on the Home Screen.
• 1 REPEAT:
The current track is played repeatedly. The
icon
appears on the Home Screen.
• ALL REPEAT:
All tracks in the selected playback area are played
back repeatedly.
The
icon appears on the Home Screen.
NOTE
If you start loop playback, the
REPEAT
item automatically
switches to OFF if it is in a different mode.