Appendix a—connection pin-out charts – Studio Technologies 76DA V.4.12 User Manual
Page 52
Issue 9, May 2014
Model 76DA/77 User Guide
Page 52
Studio Technologies, Inc.
for Surround
Appendix A—Connection Pin-Out
Charts
TASCAM® Signal
Signal
Connections
Channel High (+)
Low (–)
Shield
Pre-Fader L/R
1
24
12
25
Pre-Fader C/SUB
2
10
23
11
Pre-Fader LS/RS
3
21
9
22
Stereo Input C Direct 4
7
20
8
Post-Fader L/R
5
18
6
19
Post-Fader C/SUB
6
4
17
5
Post-Fader LS/RS
7
15
3
16
Post-Fader Stereo
8
1
14
2
Notes: 1) All signals transformer-coupled digital audio;
selectable for balanced or unbalanced AES3
compatibility.
2) Connector type on Model 76DA is 25-pin
D-subminiature female (DB-25F). Installer must
provide male (DB-25M). Connector uses 4-40
threaded inserts for locking with mating plug.
3) Wiring scheme follows TASCAM DA-88 convention.
Standard DA-88-type wiring harnesses are directly
compatible, with the possible exception of 4-40 screw
threads being required.
Connections for Digital Monitor Outputs
Signal
Pin
Direction
Data + (RS-485/RS-422)
7
Not used
Data – (RS-485/RS-422)
2
Not used
Data Shield
1
Shield
Remote Mute All
5
Input
Remote Dim
6
Input
Remote Spare 1
8
Input
Remote Spare 2
9
Input
Remote Input Common
4
Common
Note: Connector type on Model 76DA is 9-pin
D-subminiature female (DE-9F). Connector uses
4-40 threaded inserts for locking with mating plug.
Connections for Remote Control Inputs
Signal
Pin
Direction
Data + (RS-485)
1
To/From Models 77/71
Data – (RS-485)
6
To/From Models 77/71
Data Shield
2
To/From Models 77/71
DC + (12 V)
4
To Models 77/71
DC – (12 V Return)
9
To Models 77/71
DC Power Shield
5
To/From Models 77/71
Note: Connector type on Model 76DA is 9-pin
D-subminiature female (DE-9F). Connector uses
4-40 threaded inserts for locking with mating plug.
Connections between Model 76DA and
Model 77 and Model 71
Signal
Signal
Connections
High (+)
Low (–)
Shield
Surround L
24
12
25
Surround R
10
23
11
Surround C
21
9
22
Surround SUB
7
20
8
Surround LS
18
6
19
Surround RS
4
17
5
Stereo L
15
3
16
Stereo R
1
14
2
Notes: 1) Connector type on Model 76DA is 25-pin
D-subminiature female (DB-25F). Installer must provide
male (DB-25M). Connector uses 4-40 threaded inserts
for locking with mating plug.
2) Wiring scheme follows TASCAM DA-88 convention.
Standard DA-88-type wiring harnesses are directly
compatible, with the exception of 4-40 screw threads
being required.
Connections for Analog Monitor Outputs