Conﬁguration—reference level – Studio Technologies 76DA V.4.12 User Manual

Page 31

Model 76DA/77 User Guide

Issue 9, May 2014

Studio Technologies, Inc.

Page 31

for Surround

Default: Reference level set for –60.0 dB post-fader monitor output level.

Note:

The 5-second button-press delay is a safety feature ensuring that the reference level will not be accidently

changed. To permanently store the new value, you must still exit the conﬁguration mode.

Conﬁguration—Reference Level

Press and hold the Reference Level button for 5 seconds to take a “snapshot”
of the level control’s setting at the time conﬁguration mode was entered. The
Reference Level LED will ﬂash when the button is initially pressed and then
light steadily when the “snapshot” has been taken. See Note below.



This manual is related to the following products:

77 V.4.20 76DA V.4.10 77 V.4.10 77 V.4.11 76D V.3.01 77 V.3.01 76D V.4.02 77 V.4.02 76D V.4.11 76D 2014 77 2014 76D V.4.12 77 V.4.12 76D V.4.00 77 V.4.00 76D V.3.00 77 V.3.00 76DA V.4.11 760-02 V.4.15 760-03 V.4.15