Studio Technologies 76DA V.4.12 - Manual (Page 29)

Model 76DA/77 User Guide Issue 9, May 2014
Studio Technologies, Inc. Page 29
for Surround
Configuration—Bass Management and Mute/Solo Bass
Management Mode
Default: Surround output bass management disabled.
Stereo output bass management disabled.
Bass management low-pass filter slope 24 dB/octave.
Bass management high-pass filter slope 24 dB/octave.
Bass management crossover frequency 80 Hz.
Mute/solo pre-bass management mode.
Note: Bass management capability only available at sample rates of 44.1, 48, 88.2, and 96 kHz.
Press and hold the Stereo C button
to display and configure the bass
management and mute/solo bass
management mode settings. Use the Level control to select the
bass management crossover
frequency. Choices are 40, 50,
60, or 80 Hz. 
This LED displays the configuration of
the surround output bass management.
LED lit means surround output bass
management enabled; LED not lit means
surround output bass management
disabled. Use the button to change
the configuration. See Note below. This LED displays the configuration of
the stereo output bass management.
LED lit means stereo output bass
management enabled; LED not lit
means stereo output bass management
disabled. Use the button to change
the configuration. See Note below.
This LED displays
the configuration
of the mute/solo
bass manage-
ment mode. LED
lit means mute/
solo functions
occur post-bass
management;
LED not lit means
mute/solo func-
tions occur pre-
bass management.
Use the button
to change the
configuration.
Use these
buttons to select
bass manage-
ment low-pass
filter slope.
LED Surround A
lit means
24 dB/octave;
LED Surround B
lit means
12 dB/octave.
Use these
buttons to
select bass
management
high-pass
filter slope.
LED Stereo A
lit means
24 dB/octave;
LED Stereo B
lit means
12 dB/octave.