Studio Technologies 76DA V.4.12 - Manual (Page 30)

Issue 9, May 2014 Model 76DA/77 User Guide
Page 30 Studio Technologies, Inc.
for Surround
Configuration—Sync Source, Sync Input Termination,
Audio-Synced-to-Video Sample Rate, and Digital Monitor
Output Types
Default: Sync source is L/R of currently selected input.
Sync input terminated.
Audio-synced-to-video sample rate 48 kHz.
Pre-fader surround/stereo input C direct digital monitor output type balanced AES3 (110 ohms/5 Vpp).
Post-fader surround/stereo digital monitor output type balanced AES3 (110 ohms/5 Vpp).
Use the Channel Solo C and LFE buttons to
select the pre-fader surround/stereo input
C direct digital monitor output type. Use
the buttons to change the configuration.
C LED lit means unbalanced AES3 (75
ohms/1 Vpp); LFE LED lit means balanced
AES3 (110 ohms/5 Vpp).
Use the level control to adjust the audio-
synced-to-video sample rate. Available
sample rates are 32, 44.1, 48, 88.2, 96,
176.4, and 192 kHz.
This LED displays the configuration
of the sync input termination. LED
not lit means sync input is not termi-
nated; LED lit means terminated with
75 ohms. Use the button to change
the configuration.
Use the Channel Solo LS and RS
buttons to select the post-fader
surround/stereo digital monitor
output type. Use the buttons to
change the configuration. LS LED
lit means unbalanced AES3 (75
ohms/1 Vpp); RS LED lit means
balanced AES3 (110 ohms/5 Vpp).
Use these buttons
to select the sync
source.
LED Surround B
lit means sync
input, video;
LED Stereo A lit
means sync input,
DARS;
LED Stereo B lit
means sync input,
word clock;
LED Stereo C
lit means L/R of
currently selected
input.
Press and hold
the Stereo to
Mono button
to display and
select the sync
source, sync in-
put termination,
audio-synced-
to-video-sample
rate, and digital
monitor output
types.
