Auto sound control cvs, Cv 194 bell off set point, Description – SoundTraxx SoundCar Technical Reference User Manual
Page 59
Tsunami SoundCar Technical Reference
Page 57
CV 194
Bell OFF Set Point
Description
CV 194 contains a value from 0 to 126 that specifies the throttle speed step
at which the automatic bell will turn off.
D0-D6:
Bell OFF Set Point
0:
Not used. Must be set to 0.
Note: If CV 194 is set to a value equal to or less than the value of CV 193,
the automatic bell will not turn on.
Default Value: 19
Related CVs: CV 193 (Bell ON Set Point)
CV 197 (Analog Mode Auto Sound Configuration)
CV 198 (DCC Mode Auto Sound Configuration)
Bit 7
Bit 0
0
D6
D5
D4
D3
D2
D1
D0
Auto Sound Control CVs