SoundTraxx SoundCar Technical Reference - Manual (Page 49)

Tsunami SoundCar Technical Reference Page 47
CV 112
Sound Configuration 1
Description
CV 112 allows you to configure the generator and clickety-clack sound
effects. A setting of 1 in the corresponding bit position enables the selected
sound effect.
GEN: Generator Control
0 = Generator sound effect controlled by F9
1 = Generator sound effect always on
APT: Axles per Truck
0 = Two axles per truck
1 = Three axles per truck
TPC: Trucks per Car
0 = Two trucks per car
1 = One truck per car
0: Not used. Must be set to 0.
Additional Information
APT (bit 2) sets the number of axles per truck used to determine the
clickety-clack rate.
TPC (bit 3) sets the number of trucks per car used to determine the
clickety-clack rate.
Default Value: 0
Related CVs: CV 116 (Moving Sound Scalar)
CV 117 (Rolling Stock Type Select)
CV 202 (Generator Probability)
Sound Control CVs
Bit 7
Steam:
Bit 0
0 0 0 0 0 TPC APT GEN
Bit 7
Diesel:
Bit 0
RFE ACE