SoundTraxx SoundCar Technical Reference - Manual (Page 53)

Tsunami SoundCar Technical Reference Page 51
CV 116
Moving Sound Scalar
Description
CV 116 is used to set the proportion between the speed step and the
scale speed in feet per second (ft/s). The decoder uses the scale speed to
determine the frequency of the clickety-clack and flat spot sound effects.
MS0-MS7: Moving Sound Scalar
Additional Information
This CV can be programmed with any value from 0 to 255. A value of 1
corresponds to 0.01ft/s. Higher values correspond to faster scale speeds.
For example, cars with a shorter wheelbase may need a higher value in
CV 116.
Scale Speed (feet/second) = (Speed Step × CV 116) ÷ 100
Note: Entering a value of 0 will disable the clickety-clack and flat spot sound
effects.
Default Value: 100
Related CVs: CV 112 (Sound Configuration 1)
CV 117 (Rolling Stock Type Select)
Sound Control CVs
Bit 7 Bit 0
MS7 MS6 MS5 MS4 MS3 MS2 MS1 MS0