SoundTraxx SoundCar Technical Reference - Manual (Page 3)

Tsunami SoundCar Technical Reference Page 1
CV 1
Primary Address Control
Description
CV 1 contains the decoder’s primary address from 1 to 127.
A0-A6: Decoder Address
0: Not used. Must be set to 0.
Additional Information
The decoder will process all valid instruction packets containing an address
that matches the value contained in this register when bit 5 (Extended
Address Enable) of CV 29 (Configuration Register 1) is set to 0.
Programming this register with a new value will automatically reset CV 19
(Consist Address) to 0 and clear bit 5 of CV 29.
The decoder will ignore commands that attempt to program this register with
values outside the range of 1 to 127.
Note: CV 1 can only be changed in Operations Mode if the extended address
is enabled.
Default Value: 3
Related CVs: CVs 17 and 18 (Extended Address)
CV 19 (Consist Address)
CV 29 (Configuration Register 1)
Bit 7 Bit 0
0 A6 A5 A4 A3 A2 A1 A0
Primary CVs