Smithy Midas 1220 LTD - Manual (Page 102)

Threads-Metric 0.5 to 4 mm
Toolpost Travel 3-1/4”
Toolbit Size 1/2”
X-Axis Travel (w/tailstock installed) 26”
Y-Axis Travel 8-1/2”
Mill Specifications
Column Diameter 3-1/8”
Dial Calibration Drill-Coarse Feed 0.042”
Dial Calibration Mill-Fine Feed 0.042”
Drawbars Size (included) 12 mm, 3/8”
Drill Chuck Size (included) 1/2”
Drill Chuck Arbor Size (included) MT3/JT33
Feed Rates .0011-.020” (Y-Axis)
.0022-.040” (X-Axis)
Head Rotation 180 Degrees
Head Travel 2-3/4”
Quill Diameter 2-3/4”
Quill Travel 3-1/8”
Spindle Center to Front of Chuck 8-3/4”
Spindle Center to Lathe Spindle Flange 11”
Spindle Center to Support Column 12-1/8”
Spindle to Table Distance (min-max) 6-1/4”-13”
Spindle Speeds 9 (315-2000 RPM)
Spindle Taper MT3
Tool Size Limits 1”
X-Axis Travel 12-1/16”
Y-Axis Travel 8-1/2”
Electrical
Amperage 11 Amps Lathe & Mill
Horsepower 3/4 hp Lathe, 3/4 hp Mill
Motor Type A/C
Phase Single
Voltage 110 Volts A/C
Midas 1220 LTD Operator’s Manual
21-2
For Assistance: Call Toll Free 1-800-476-4849