Sloan ELC-41000 Installaton - Manual (Page 4)

4
• Electric drill for drilling anchor holes.
• Socket or open end wrench for installing anchoring fasteners.
• Open end wrench for connecting water lines.
• Pipe wrench for installing drain lines.
Quadruple Station Lavatory System
MODEL ELC-44000 SERIES — 0.5 gpm (1.9 Lpm) Max. — Aerator
LAVATORY SYSTEM WEIGHT (Empty) — 240 Lbs. (108 kg)
LAVATORY SYSTEM ROUGH-IN
TOOLS REQUIRED FOR INSTALLATION
SINK LOCATION
Determine the appropriate wall location for the Lavatory System. Consider that hot and cold water supply lines, a drain line, and an electrical source (receptacle) will
be required. Compare the physical dimensions of the Lavatory System to the space available for the installation. If wall is not load bearing, a carrier may be required
behind the wall. Refer to the appropriate Rough-in diagram on pages 2 – 4 for Lavatory System dimensions.
Prior to Lavatory System installation, electric wiring, water supply and drain must be installed.
Triple Station Lavatory System
MODEL ELC-43000 SERIES — 0.5 gpm (1.9 Lpm) Max. — Aerator
LAVATORY SYSTEM WEIGHT (Empty) — 180 Lbs. (81 kg)