Skutch Electronics BA-1000 V5.xx - Manual (Page 8)

Version 5.00 Page 4
require that you reformat the disk before
using it again.
3) Connect one end of the MODULAR CORD to
the BA-1000 and the other end to your RJ-11
telephone jack.
Operation
Each of these sections assumes you are starting
from the main MENU. You can always return to the
menu by pressing the ~ enough times.
Initial ONE Time Setup
Enter:
4 # 4 # 4 # 4 #
Pause 1 second.
Enter:
# * # # * # # * # # * # (Your Area Code) # # # #
Make a Play Only
Message
Enter:
8 # 8 # 8 # 8 #
Pause 1 second.
Enter:
1 1 1 1
Wait until it shows:
Mic in & Press 1
Plug microphone into MIC IN jack and press:
1 1 1 1
For BEST audio quality, hold the microphone 3
inches away from your mouth; when tone stops,
immediately dictate your message.
When finished, enter:
~ 9 # ~ 9 # ~ 9 # ~ 9 #
Make a Message to get
Name & Number
Enter:
8 # 8 # 8 # 8 #
Pause 1 second.
Enter:
1 1 1 1
Wait until it shows:
Mic in & Press 1
Plug microphone into MIC IN jack and press:
1 1 1 1
For BEST audio quality, hold the microphone 3
inches away from your mouth; when tone stops,
immediately dictate your message.
When finished, enter:
~ * # ~ * # ~ * # ~ * #
Dial a Range of Numbers
Enter:
2 # 2 # 2 # 2 #
Pause 1 second.
Enter:
1 5 1 5 1 5 1 5
Wait until it shows:
0-Entry> 00000 N
Enter:
* 8 # * 8 # * 8 # * 8 #
Enter the starting phone number exactly as you
would dial it, then # # # #, # # # #, example - 786-0000 is
entered:
7 8 6 0 0 0 0 # #
7 8 6 0 0 0 0 # # 7 8 6 0 0 0 0 # # 7 8 6 0 0 0 0 # #
Wait until it shows:
0-Entry> 10000 N
Enter:
~ 3 # ~ 3 # ~ 3 # ~ 3 #
Wait until it shows:
0-Entry> 00000
---- #=Dial ----
Press:
# # # #
It is done calling when it shows:
End of Session
--- Press # ---