Scotsman SCE275 - Manual (Page 8)

Removal of the Cabinet
One of the most useful features of this ice machine
is the ability to remove the cabinet from the ice
machine without removing the ice machine from its
installed position.
To Remove:
To remove the cabinet base the hood must be
removed first.
1. Remove 5 screws and the three grills at the front
of the base.
2. Push and hold the Off button the AutoIQ
Controller until the machine has switched OFF. Be
certain the ice machine has been switched off.
3. Open the bin door and unscrew the knobs at the
left and right inside of the ice storage bin. Unscrew
the knobs all the way out.
4. Pull the hood and door assembly straight out
until it can be lifted up.
5. In the area behind the grills (removed in step 1)
are two knobs similar to those removed in step 3.
Unscrew and remove the two knobs.
6. Locate the bin drain. Loosen the hose clamp
holding the drain tube to its fitting and pull the drain
tube off of the fitting.
7. Lift up the front of the base and rotate the base
up and off of the ice machine.
The machine is now exposed for service.
SCE275
January 2003
Page 8
Bin Drain
STEP 2
Hood
STEP 4
STEP 3
STEP 1
STEP 5
Note: Controller on left
side of cabinet on G
series and higher.