Scotsman SCE275 - Manual (Page 15)

SCE275
January 2003
Page 15
How To Operate The AutoIQ Controller
The AutoIQ Controller is a microprocessor based
device that receives input from several sources
and switches various components on and off.
Its manual control is thru the use of the Push
Button Control Switches
1. Freeze Button. Pushing and releasing this
button starts or restarts the machine. The AutoIQ
Controller remembers what cycle it was last in and
returns to that cycle.
2. Harvest Button: Pushing and releasing this
button will cause the machine to go directly to a
Harvest Cycle. Can be done from Freeze or Off.
The machine will switch Off at the end of the
Harvest cycle.
3. Clean Button: Pushing and releasing this button
will cause the machine to only power the water
pump for circulation of ice machine cleaner. After
the ice machine cleaner has
circulated for about 10
minutes, a second push of this
button will switch on the
rinsing system to flush out the
dissolved scale and ice
machine cleaner.
4. Off Button: Pushing and
releasing this button will
switch the machine OFF at the
end of the next cycle. If the
button is pushed and HELD
for more than 3 seconds, the
unit will switch off immediately.
To Reset: First push and
release the Off button, then
push and release the Freeze
button.
1
2
3
4
5
6
7
8 9
BIN FULL
FREEZE
HARVEST
CLEAN
OFF
WATER
REFRIGERATION
RESERVOIR WATER
LEVEL SENSOR
BIN CONTROL SENSOR
BIN CONTROL SENSOR
RESERVOIR & DISCHARGE
LINE THERMISTORS
LOW VOLTAGE IN/OUT
WATER VALVE
HOT GAS VALVE
CONTACTOR COIL
STACKING
FUTURE USE
FACTORY USE
PUSH BUTTON
CONTROL SWITCHES
HI VOLTAGE IN/OUT
WATER PUMP
AIR COOLED FAN MOTOR
INDICATOR LIGHTS:
ERROR LIGHTS: