Scotsman SCE275 - Manual (Page 33)

SCE275
January 2003
Page 33
Removal and Replacement: Bin Control Set
Bin Controls
The bin controls are located in between the two
evaporators, one on the left and one on the right.
The hood must be removed to gain access to
them.
1. Remove the right front grill.
2. If the machine is making ice, push and release
the Harvest button.
3. After the ice has fallen off the evaporators, push
and hold the Off button until the machine stops.
4. Unplug the machine or disconnect the electrical
power.
5. Remove the two knobs holding the hood to the
bin.
6. Slide the bin forward to remove it from the ice
machine.
7. Locate the bin controls and brackets.
8. Remove the thumb screws holding the bin
controls to the evaporators.
9. Pull the bin controls up and out of the ice
machine.
10. Trace the wires back to the connectors, and
unplug them.
11. Reverse steps 10-1 to replace the bin controls.
Note: They MUST be changed as a set.
The bin controls must be positioned so that the
flange of the bin control is behind the water trough.
Remove the Mounting Bolt First
Remove Mounting Bolt
Bin Controls May Have a Shield Over Them
Bin Control
Edge of
Water
Trough
Flange of
Bin Control