Sensor maintenance – Scotsman NME1854R User Manual
Page 22
NME1854R & FME2404R
January 2000
Page 22
1. The bin control uses devices that sense light,
therefore they must be kept clean enough so that
they can “see”. At least twice a year, remove the
bin control sensors from the base of the ice chute,
and wipe the inside clean, as illustrated.
2. The ice machine senses water level by a probe
located in the water reservoir. At least twice a
year, the probe should be removed from the
reservoir, and the tip wiped clean of mineral
build-up.
SENSOR MAINTENANCE
These units consist of two separate Ice Machines; to properly clean and maintain the them, these steps
must be followed for both systems.
ICE DISCHARGE
CHUTE
SLIDE IN AND
OUT
ICE LEVEL
SENSORS
Clean the Probe's Tip with ice
machine cleaner and a clean,
soft cloth.
3. Clean the air cooled remote condenser coil when
it becomes restricted.