Scotsman NME1854R - Manual (Page 2)

FOR THE INSTALLER
These machines are designed to fit
the following Scotsman storage
bins:
· B90 and extensions, with bin top
KBT18.
· BH800 no bin top needed.
· BH900 using bin top KBT14.
When installing a new system,
check to be sure that you have
everything you need before
beginning:
· Correct Bin
· Correct Ice Machine
· Correct Bin Top
· All kits, legs, and information
required for the specific job.
NME1854R & FME2404R
January 2000
Page 2
BACK VIEW Liquid Line
Discharge Line
Connection
(left system)
Remote Condenser
Junction Box
Electrical Inlet
Water Inlet 3/8" Flare
Drain 3/4" FPT
21.66"
3"
5.25"
20.84"
Allow 6"
above
machine for
service.
15.53"
21"
3.1" 3.1"
4.5"
9.43"
17.8"
18.8"
There are two separate ice making
and refrigeration systems in this
model. The liquid and discharge
lines from each system must go to
separate circuits in one remote
condenser (ERC302).
TOP VIEW
Allow 6" of space behind the machine
for utility connections.
34.84"
13.84"
18.28"
SPECIFICATIONS: Ice Machine
Model Number Dimensions
(w/o bin)
Basic
Electrical
Ice Type Cond.
Type
Minimum
Circuit
Ampacity
Maximum
Fuse Size
Refrigerant
Charge
H X W X D
FME2404RS-32A 27" x 42" x 24" 208-230/60/1 FLAKE R-Air 22.8 30 208
FME2404RS-3A 27" x 42" x 24" 208-230/60/3 FLAKE R-Air 17.6 20 208
NME1854RS-32A 27" x 42" x 24" 208-230/60/1 Nugget R-Air 22.8 30 208
NME1854RS-3A 27" x 42" x 24" 208-230/60/3 Nugget R-Air
Minimum circuit ampacity is used to determine wire size and type per National Electrical Code.
Ice Chute
6.7" x 6.2"