Scotsman CME1356 - Manual (Page 15)

AutoIQ Controller
Indicator Lights:
• Bin Full: On when bin is full, goes on and
off as ice falls during a harvest cycle.
• Freeze: On when the unit is in the Freeze
cycle, blinks when a freeze mode is pending.
• Harvest: On when the unit is in the Harvest
cycle.
• Clean: On when the unit is in the Clean
cycle, blinks when preparing for a clean
mode.
• Off: On when the unit has been switched
off, blinks when the machine is preparing to
shut off.
• Water: On when the controller has identified
a problem with the water system.
• Refrigeration: On when the controller has
identified a problem with the refrigeration
system.
Cycle Definitions:
• Freeze: The refrigeration system is operating
to remove heat from the evaporators. The
compressor, fan motor (if air cooled) and
water pump are ON.
• Harvest: The refrigeration and water
systems are operating to harvest the ice
cubes. While the compressor is on for the full
cycle, the water pump will be off at the
beginning and inlet water valve will switch off
before the end.
• Clean: The Inlet Water Valve opens to fill the
reservoir. The Water Pump starts. The Clean
indicator light is switched ON. A manually
initiated rinse flushes the system.
1
2
3
4
5
6
7
8 9
BIN FULL
FREEZE
HARVEST
CLEAN
OFF
WATER
REFRIGERATION
RESERVOIR WATER
LEVEL SENSOR
ICE SENSOR
ICE SENSOR
RESERVOIR & DISCHARGE
LINE THERMISTORS
LOW VOLTAGE IN/OUT
WATER VALVE
HOT GAS VALVE
PURGE VALVE TIMER
CONTACTOR COIL
STACKING and/or
THERMOSTAT
FUTURE USE
FACTORY USE
PUSH BUTTON
CONTROL SWITCHES
HI VOLTAGE IN/OUT
WATER PUMP
INDICATOR LIGHTS:
DIAGNOSTIC LIGHTS:
CME1356 and CME1656
May 2000
Page 15