Scotsman C0522R - Manual (Page 7)

January 2014
Page 6
C0522 through C1030
Remote Condenser Models - User Manual
Product Description and Electrical Requirements
Dimensions
w” x d” x h”
Model Series Electrical Use
condenser
Minimum
Circuit
Ampacity
Maximum
Fuse Size*
22.75** x 24 x 23 C0522SR-1 A or B 115/60/1 ERC111-1 14.9 15
30.75** x 24 x 23 C0530SR-1 A or B 115/60/1 ERC111-1 14.9 15
same C0530SR-1 C 115/60/1 ERC111-1 16.2 20
same C0630SR-32 A or B 208-230/60/1 ERC311-32 18 20
30.75** x 24 x 29 C0830SR-32 A or B 208-230/60/1 ERC311-32 10 15
same C0830SR-3 A or B 208-230/60/3 ERC311-32 8.2 15
same C1030SR-32 A or B 208-230/60/1 ERC311-32 15.6 20
same C1030SR-3 A or B 208-230/60/3 ERC311-32 10.8 15
*Or HACR circuit breakers.
** Maximum width at top panel.
Ratings include the remote condenser motor, as it
is designed to be powered by the ice machine. If
connecting remote condenser independently of the
ice machine, use the information on the condenser's
dataplate for fuse and wire sizes.
Table notes: Medium cube models have the same
electrical characteristics as Small. Series revision
code omitted. All the listed condensers include a
headmaster valve.
Central Condenser Coils
The ice machine may be connected to a central
condenser coil. The requirements are:
• Coil – not previously used with mineral oil system.
Virgin coil preferred.
• Correct size (internal volume) and capacity
(BTUH).
• Includes a headmaster valve for discharge
pressure control. Headmaster kit available
for certain MAC condensers, kit number is
RCKCME6GX.
• Fan motor on all the time or controlled to be on
whenever the ice machine is operating.
• Non-Scotsman condensers must have prior
Scotsman Engineering approval for warranty
coverage to be in effect.
Precharged tubing kits:
The ice making head’s and the remote condenser’s
refrigeration circuits must be connected. They
are designed to be connected using precharged
refrigerant tubing, supplied in kits of liquid and
discharge tubes. Several lengths are available, order
the one that just exceeds the length needed for the
site.
10” 20’ 40’ 75’
RTE10 RTE25 RTE40 RTE75
No additional refrigerant is required.
Note: Refrigerant charge is supplied with the ice
machine.