RGBLink VSP 3550S User Manual - Manual (Page 79)

5. System Setup and Operation
How to Save the Parameter
VSP 3550 User Manual 79
How to Save the Parameter
Save user mode to the customer for different scene directly call, leave out
the edit operation inconvenience, VSP 3550 provides ten save
preferences.
1. Press [SAVE] button, the light of button 0~9 is on or flash, the button on
can be saved and flash will be overwrite, as shown on OLED menu:
2. The figure: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 means SAVE1~10, user can push
any button that is on to save. For example, save to SAVE2, push button
2, the OLED panel will show as follows after finish saving:
3. Push [SAVE] button again, button light is off, and exit the SAVE function.
SAVE TO
—
>SAVE 1
Button is on can be saved
Button flashes will be overwrite
SAVE TO
—
>SAVE 2 FINISHED!
Button is on can be saved
Button flashes will be overwrite