How to crop the layer image, System setup and operations – RGBLink VSP 3550S User Manual User Manual

Page 67

5. System Setup and Operations

How to Crop the Layer Image

VSP 3550 User Manual 67

Firstly, ensure the device is power on and in normal operation.

Operations are as follows:

1. Push any button of OUTPUT DVI1~DVI4, the button blinks, and the

layer can be edited.

2. Push [CROP] button, key lights, and start the crop function, OLED

shows as follows:

3. Turn the knob, or push the number button to input the number directly,

push the knob to confirm. OLED shows as follows:

4. Push [CROP] button again, key light is off, and exit the crop function.

—

>CROP WIDTH 1024

CROP HEIGHT 768
CROP X 0
CROP Y 0
RESET