RGBLink VSP 3550S User Manual - Manual (Page 77)

5. System Setup and Operation
How to Realize Test Pattern Output and Settings
VSP 3550 User Manual 77
How to Realize Test Pattern Output and
Settings
Test Pattern is used to calibrate the screen or system, especially when
there is not standard input measure instrument.
Push [TP] button, and enter test pattern option, OLED shows as follows:
Turn the knob and select option. Push knob and go into
the menu, there are 66 kinds of test pattern option ready. If set the Test
Pattern enable as auto switching mode. VSP 3550 will output all the Test
Pattern one by one, and the interval between each is 1~10S.
User can also turn the knob and select option. Push knob
and go into the menu, RED color range is from 0~255, GREEN is from
0~255, and BLUE is from 0~255.
MODE PURE IMAGE
->PURE COLAR 》
->RED 255
GREEN 255
BLUE 255
->MODE TEST PATTERN
TEST PATTERN 》
MODE TEST PATTERN
->TEST PATTERN 》
->TEST PATTERN 1
AUTO SWITCH OFF