RGBLink VSP 3550S User Manual - Manual (Page 31)

2. Hardware Orientation
VSP 3550 Front Panel
VSP 3550 User Manual 31
HDMI input selection button, its LED light flashes, output will be switched to
this channel.
SDI input selection button, its LED light flashes, output will be switched to
this channel.
BLACK button, its LED light turns on, default setting of the test pattern.Test
pattern can be set and selected from OLED menu, push the button again, to
exit black.
Test Pattern button, push the button, its LED light turns on, output will be
switched to test pattern mode. User can choose the modes from OLED
menu. Push the button again, and exit test pattern mode.
4K×1K Split button, input DVI2 and DVI3, support split modes for: 2 IN 2
OUT, 2 IN 3 OUT, and 2 IN 4 OUT, shown as follows:
Split Mode 1: 2 IN 2 OUT