RGBLink VSP 3550S User Manual - Manual (Page 71)

5. System Setup and Operations
How to Achieve 4K×1K Split
VSP 3550 User Manual 71
How to Achieve 4K×1K Split
Firstly, ensure the device is power on and in normal operation, and input
DVI2 and DVI3.
Operations are as follows:
1. Push button 4K×1K, key lights, and enter the output split function.
2. Button 4K×1K can achieve split modes of 2 IN 2 OUT, 2 IN 3 OUT and
2 IN 4 OUT. Split results are as follows:
Split Mode 1: 2 IN 2 OUT Split Mode 2: 2 IN 3 OUT
Split Mode 3: 2 IN 4 OUT
4. Turn the knob, user can select the split mode according to actual
need.
5. Push any button of DVI1, DVI2, DVI3, DVI4 and Layer A and B, select
preset output, key blinks, and it is selected and can be edited.
6. Push [SCALE], [CROP], and [POS] button, key lights, user can set the
size and position of output image. (CROP function is not available for
Layer A and B in V1.0)
7. Turn the knob, or push the number button to input the number directly,
user can set the size and position of output image.