RGBLink VSP 3550S User Manual - Manual (Page 61)

5. System Setup and Operations
How to Realize Single Image Switching
VSP 3550 User Manual 61
How to Realize Single Image Switching
Boot the system default CV1 to the current input source (key flashes), if
need seamless switching other source such as DVI, direct light touch DVI
key, OLED screen display as follows:
Choose DVI buttons, button lamp CV1 destroy, and DVI key light and
flashes, can realize single image of input signal source switching (input
signal source by original CV1 switching to DVI).The same method can be
switched CV2, VGA1, VGA2, DVI,HDMI, SDI.
Note
Seamless switch: means signal switch will not
appear any flash point, black, shaking or delay.
SOURCE SELECT:
>DVI INPUT DVI：
->1920 * 1080 * 60