RGBLink VSP 3550S User Manual - Manual (Page 49)

4. Menu Orientation
MENU
VSP 3550 User Manual 49
PHASE: Input image phase.
Note
Only comments to professional operator.
AUTO ADJUST: Auto adjust VGA1 input signal H POS, V POS, CLOCK,
PHASE, auto adjust to display in full screen image.
Note
Comments customers to use this operation in
adjusting the VGA input shiftment.
ADC ADJUST: Mainly aim at the BRIGHTNESS to auto adjusting.
GAMMA: Gamma setting, press it to adjust the image gamma value.
Gamma values include: LINEAR, sRGB, -1.2, -1.4, -1.6, 1.2, 1.4, 1.6.
ASPECT RATIO: Change the value to convert the aspect ratio for different
wide and height ratio settings.
DEFAULT: Original video ratio.
16:9: 16:9 aspect ratios.
MENU---TEXT OVERLAY
Push the [MENU] button to go into the main menu, and turn the knob to
select , show menus as follows:
It can adjust the text overlay function settings including as follows:
TEXT OVERLAY: Can select ―ON‖ or ―OFF‖, OFF is the default setting.
PRESET: Can preset value of the following functions, and total 13 modes:
User: User mode.
WhOnBk1: White On Black 1.
WhOnBk2: White On Black 2.
BkOnWh1: Black On White 1.
BkOnWh2: Black On White 2.