Remotec Z-URC550 V1 - Manual (Page 42)

42
AV Control Frequently Asked Questions
Q My
Z-URC
TM
does not work at all!
A Check your A/V device, if the device's main switch is turned off,
your Z-URC
TM
cannot operate your device.
A Check whether your batteries are inserted properly and are in the
correct +/- position.
A Check whether you have pressed the corresponding device mode
key for your device.
A If the batteries are low, replace the batteries.
Q If several Device Codes are listed under the brand of my A/V
device, how can I select the correct Device Code?
A To seek the correct Device Code for your A/V device, test the
codes one by one until most keys work properly.
Q My A/V equipment responds only to some of the commands.
A You have set a code for which only some commands work
properly but some do not. Try other codes until most keys work
properly. You can also use the learning function to learn additional
keys.
TECHNICAL SPECIFICATIONS
Model No. BW8332 V1 (Z-URC
TM
550EU)
RF Frequency 868.42MHz (EU)
IR Frequency Up to 455kHz
IR Learning Max 100 commands
Max. Range
up to 100ft outdoor line of sight, in
unobstructed environment
Power AAA x 3pcs
Temperature
operation: 0~40℃
storage: -20~60℃
Dimension (LxWxH) 240mm x 60mm x 29mm
Weight
(ex. Batteries)
150g