REMKO Condensate Catch Tray With Oil Separator - Manual (Page 7)

7
Install the outdoor unit on the wall-mounted console as follows:
1. Using suitable fastening material, install the unit on a wall designed to carry
the load. Make sure that the height at which it is installed above the floor is
adequate (above the expected snow level!) and that the clearance of the wall-
mounted consoles on the left and on the right is adequate for the type of unit
being installed (clearance B). It is best to take the clearance B directly from the
outdoor component. The brackets with the vibration dampers included in the
scope of delivery are placed on the two supports as shown in the illustration.
First tighten the bolts lightly by hand so that the bracket clearances can be easily
adjusted.
The clearance required between
the left and right wall-mounted
consoles is indicated by the
clearance B figure Take the clearance B figure directly
from the outdoor unit between the
left and the right
wall-mounted consoles