REMKO Condensate Catch Tray With Oil Separator - Manual (Page 4)

4
REMKO
WITH INTEGRATED OIL SEPARATOR
CONDENSATE CATCH TRAY
Carefully read the operating manual before
placing the unit into service for the first
time. It contains useful tips and notes
such as hazard warnings to prevent
injury and material damage. Failure to
follow the directions in this manual can
result in endangerment to persons, the
environment and the equipment itself and
will void any claims for liability.
■ Keep this manual in the vicinity of
the units.
■ The units and components may
only be set up and installed only by
qualified personnel.
■ The set-up, connection, and operation
of the units and components must
be in accordance with the operating
conditions stipulated in this manual
and comply with all applicable local
regulations.
■ The condensate catch tray must be
grounded.
■ Modification of units and components
supplied by REMKO is not permitted
and can cause malfunctions.
■ Units and components may not be
operated in areas where there is an
increased risk of damage. Observe
the minimum clearances.
Safety notes
■ The electrical power supply is to be
adapted to the requirements of the units.
■ The operational safety of units and
components is only assured if they are
fully assembled and used as intended.
Safety devices may not be modified
or bypassed.
■ Do not operate units or components
with obvious defects or signs of damage.
■ The units and components must
be kept at a safe distance from
flammable, explosive, combustible,
aggressive and dirty areas or
atmospheres.
■ Installation, repair and maintenance
work may be carried out only
by authorised specialists. Visual
inspections and cleaning can be
performed by the operator as long
as power is disconnected from the
equipment.
■ To preclude any danger to persons
from the unit, take appropriate
precautions when performing
installation, repair or maintenance
work or cleaning the units.