REMKO Condensate Catch Tray With Oil Separator - Manual (Page 14)

14
REMKO
WITH INTEGRATED OIL SEPARATOR
CONDENSATE CATCH TRAY
The clearance required between the
left and right wall-mounted consoles
is indicated by the clearance B figure The clearance B figure is taken
directly from the outdoor unit
between the left and the right
wall-mounted consoles
Install the outdoor unit on the floor console as follows:
1. Set the floor consoles on a firm surface designed to carry the load.
Suitable surfaces are for example two foundation strips with a width of approx.
10 cm or securely anchored paving stones.
The surface must also be level and horizontal. Make sure the distance between
the floor consoles on the left and on the right is adequate for the type of unit
being installed. It is best to take the clearance figure directly from the outdoor
component. The brackets with the rubber dampers included in the scope of
delivery are placed on the two supports as shown in the illustration. First tighten
the bolts lightly by hand so that the bracket clearances can be easily adjusted.