REMKO Condensate Catch Tray With Oil Separator - Manual (Page 5)

5
Description
Warranty
The warranty conditions are listed in the
"General terms and conditions".
Please contact your direct contract
partner first.
Environmental
protection and recycling
Disposing of packaging
All products are packed for transport
in environmentally friendly materials.
You can make a valuable contribution
to reducing waste and sustaining raw
materials by only disposing of packaging
at approved collection points.
Disposing of the
components
The manufacturing process for the units is
subject to continuous quality control. Only
high-grade materials are used, the majority
of which are recyclable. You can also
contribute to environmental protection
by only disposing of components in
accordance with local regulations and
in an environmentally safe manner, e.g.
through authorised disposal and recycling
specialists or at collection points.
The condensate catch tray catches
condensation or water produced from
defrosting under the unit from which it
can be drained in a controlled manner.
This keeps the installation site dry, which
can be a structural requirement, and also
reliably prevents ice from forming below
the unit. The condensate can be drained
using an existing drain pipe or by
installing a trickle line insofar as the soil
can absorb the seepage. The condensate
catch tray comprises a stainless steel tray,
a leaf grill, a condensate drain heater,
brackets and miscellaneous fastening
material.
Intended
use
The condensate catch tray accessory
catches condensation or water
produced from defrosting under the air
conditioning unit from which it can be
drained in a controlled manner.
Another or additional use is considered
an unintended use. The manufacturer/
supplier assumes no liability for damages
arising from such use. The user bears the
sole risk in such cases.
Intended use also includes working
in accordance with the operating
manual and installation instructions
and complying with the maintenance
requirements.