REMKO Condensate Catch Tray With Oil Separator - Manual (Page 19)

19
Maintenance and Cleaning
Maintenance
The oil protector should be inspected and cleaned regularly. Leaves and other
contaminants can, under certain circumstance, inhibit the function of the oil
separator.
The water drain can be used to backflush the oil separator.
Immediately shut down the plant and check it for leaks if there are traces of oil in
the oil protector.
Oil residue and oil traces must be disposed of correctly.
Cleaning
Immediately shut down the plant and check it for leaks if there are traces of oil in
the oil protector.
Oil residue and oil traces must be disposed of correctly.
Please note that various cleaning agents dissolve oil in water. If this kind of cleaning
agent is used, the oil protector must be flushed with water until there is no more
cleaning agent in the oil protector.
Series Condensate catch tray
Weight kg 10.6
Width: mm 1007
Depth: mm 420
Height: mm
60 with 1" drain nozzle
35 without 1" drain nozzle
Drain nozzle centred
Rated capacity of the condensate
drain heater
W 60
Length of the condensate drain heater m 4
EDP no.: 260085
We reserve the right to make modifications to the dimensions and to the design which serve the
ongoing technical development
Technical data
WKM 560 WKM 560 Plus BK 120/160
Bracket 560 mm 560 mm -
Wall bar 520 mm 520 mm -
Total depth 600 mm 600 mm 1 m
Weight 2,2 kg 4,2 kg 5 kg
Loading weight max. 100 kg 200 kg 150
EDP no.: 260085 260078 260020
Wall-mounted and floor consols
Condensate catch tray