REMKO ATY 260 - Manual (Page 12)

PROGRAMMING TIMER ON/OFF
The regulation turns the unit on or off after programming. In operation,
all settings are visible on the display. Out of operation, only the timer
settings are visible.
Unit On Unit Off Example:
The regulation turns on at 9:00.
The unit is in operation until 16:30.
TIMER OFF (Covered)
This button is used to program a decremental turn off timer. By pressing
the button several times, the timer can be set to 30 minutes, 1 hour,
2 hours, 3 hours or 5 hours. The current time is replaced by the still
remaining time.
OFF OFF OFF
With this button, the air volume flow in cooling and heating operation is
increased for 30 minutes. This makes it possible to cool off or warm up
a room quicker. The ventilation and dehumidification mode cannot be
obtained, the system changes to automatic mode.
After 30 minutes, the regulation returns to the last programmed settings.
TURBO Button (covered)
TURBO TURBO TURBO
PROGRAMMING TIMER OFF
TIMER  SET
Unit out of
operation
Programmed
time reached

REMKO ATY
12