REMKO ATY 260 - Manual (Page 10)

The time can be programmed by pressing the CLOCK button under the
cover. The time blinks in the display and the current time can be set via
the button  and  under the cover. Programming is completed by
pressing the SET button, the display no longer blinks.
CLOCK Button (covered)
 SET CLOCK
The oscillating function of the air fins can be adjusted with this button.
This makes it possible to directly switch between an adjusted position and
the oscillating function. The air distribution in the room is improved with
the swing function.
SWING Button (covered)
SWING SWING SWING
The fan speed can be adjusted with this button. A selection can be made
between low, medium, high and automatic fan speed.
FAN FAN FAN FAN
FAN B utton
In the dehumidification mode, the room temperature can be adjusted
between 18 °C and 30 °C. Due to the low temperature of the refrigerant,
the dew point of the air on the condenser is lower. The excess moisture in
the air is condensed on the condenser, the room is dehumidified. The fan
speed cannot be changed.
DEHUMIDIFICATION MODE
DEHUMIDIFICATION
MODE
SWING
REMKO ATY
10