REMKO ATY 260 - Manual (Page 11)

With the button a programming function is activated, which causes
the nominal temperature in the cooling mode to increase after one hour
by 1 °C and after 2 hours by 2 °C . In the heating mode, the nominal
temperature is decreased after one hour by 1 °C and after 2 hours
by 2 °C.
SLEEP button (covered)
Nominal temperature +1°C
Unit operation
1st hour
Functional diagram
Operation
Stop
Nominal temperature +2°C
2nd hour 6th hour
1st hour 2nd hour 6th hour
Nominal temperature -2°C
Nominal temperature -1°C
SLEEP SLEEP SLEEP
TIMER Button (covered)
The turn on and turn off time can be programmed with this button. By
pressing the TIMER button several times, the turn on, the turn off and
the combined turn on and off timer is activated. The turn on or turn off
time blinks. The timer display on the interior unit lights up. The desired
turn on or turn off time is set by pressing the buttons  and . After
completed adjustment, the timer symbol still blinks for approx.
15 seconds. After pressing the SET key, the programming is completed.
When the programmed time is reached, the unit turns on or off
automatically. When the unit is turned on automatically, then the mode,
the temperature and the fan speed of the last settings is reactivated.
The prior deletion of the on and off time is made by pressing the
corresponding timer button. The timer display on the interior unit turns
off.
PROGRAMMING TIMER ON
TIMER  \ SET
Unit in
operation
Programmed
time reached
 /
11