Pacific Research Solutions RI-1 - Manual (Page 55)

Pacific Research Solutions RI-1 and PE-1 User Manual
Page 49
S-Cmd 69 EXIT S-COMMAND PROGRAMMING
When you enter the programming mode, the controller will copy the current system EEPROM data into the system RAM (See
S-Command 66 for a detailed description on system memory). After you make changes, you can exit the programming mode
(lock the controller) and save your changes to the EEPROM or recall the old data from the EEPROM, not saving your changes.
If no S-Commands are executed for 5 minutes, a timer will automatically lock the controller for you and discard your changes.
SYNTAX:
69 [Save]
READ BACK N/A
STORAGE: N/A
PARAMETERS: 0 Discard changes
1 Save changes
DEFAULT: N/A
EXAMPLE: 69 1 Exit S-Command Programming mode and save system RAM to the EEPROM
S-Cmd 70 through 99 RESERVED