Orion System GPC-XP Controller - Manual (Page 17)

GPC-XP Controller Technical Guide
Section 5: Confi guring Binary Inputs
17
Components and Navigation
Binary Inputs
The Binary Inputs Window is located in the upper center of the
GPC-XP Controller Status Screen (Figure 8, page 11). There are 8
Binary Inputs. See Figure 24 below for the Binary Inputs Window
component details.
Figure 24: Binary Input Window Components and Navigation
Renaming Binary Inputs
To give the Binary Input a new name, click on the blue highlighted
Binary Input # fi eld and the Binary Input Data Entry Dialog Box will
open (Figure 25 below). Once you have typed in a new description
(max 17 characters), press
to save.
Figure 25: Binary Input Data Entry Dialog Box
Right or Left-click on any of the Binary Input name
fi elds to access the description entry box to add or
change the name of the Binary Input.
Left-click on the Status box to confi gure the Binary
Input.
Right-click to override the Binary Input.
The bell will light up to indicate that an alarm is on.
The Light bulb will light up when the Input is in the
Occupied Mode.