Orion System GPC-XP Controller - Manual (Page 12)

Section 4: Confi guring Analog Inputs
GPC-XP Controller Technical Guide 12
Components and Navigation
Analog Inputs
The Analog Inputs Window is located in the upper left-hand side of
the GPC-XP Controller Status Screen (Figure 8, page 11). There are
8 Analog Inputs. See Figure 9 below for the Analog Inputs Window
component summary and the pages that follow for details.
Right or Left-click on any of the Analog Input name
fi elds to access the description entry box to add or
change the name of the Analog Input.
Left-Click in the data entry fi eld to confi gure the Analog
Input.
Right-Click on these fi elds to access the Calibration,
Override, and Clear Override.
The bell will light up to indicate that an alarm is on.
The Light bulb will light up when the Input is in the
Occupied Mode.
Figure 9: Analog Input Window Components and Navigation
Renaming Analog Inputs
To give an Analog Input a new name, click on the blue highlighted
Analog Input # fi eld and the Analog Input Data Entry Dialog Box
will open. See Figure 10 below. Once you have typed in a new
description, press
to save. The maximum number of
characters is 17.
Figure 10: Analog Input Data Entry Dialog Box