OpenEye CM-730 - Manual (Page 32)

32
System
Note
The System tab is only accessible by the Administrator.
System
Host Name – The Host Name is used to identify the camera on your system. If camera
based Motion Detection is enabled and is set to send alarm message by Mail/FTP, the
host name entered here will display in the alarm message.
Time Zone – Select your time zone.
Sync With Computer Time – Select to synchronize the camera date and time with the
connected PC or DVR.
Manual – Set video date and time manually.
Sync with NTP server – Network Time Protocol (NTP) is an alternate way to set your camera’s
clock by synchronizing with an NTP server. Specify the server you wish to synchronize in the NTP
Server box. Then select an Update Interval. For more information about NTP, visit www.ntp.org.