Setup & configuration, Connecting to the camera, Resetting the camera – OpenEye CM-730 User Manual
Page 27: Administrator/user privileges
30104AD
27
SETUP & CONFIGURATION
CONNECTING TO THE CAMERA
1. Locate the camera on the IP Finder list.
2. Double-click the camera to open the Viewer software in your web browser.
3. Log in to the camera with the appropriate User Name and Password.
Note
The default User name is Admin and the default Password is1234. The
username and password are case sensitive. OpenEye recommends you change
the Admin password for security reasons.
Resetting the Camera
If it is necessary to reset the camera to the factory default settings, hold down the Reset
button (see Connections) for 30 seconds. This will return all settings, including network
setup, to the factory default. The IP address of the camera will return to 192.168.0.250.
Administrator/User Privileges
The Administrator account has the authority to configure the IP camera and authorize
users’ access to the camera. The User accounts have access to the camera with limited
authority.