OpenEye CM-512 Installation Manual - Manual (Page 26)

26
Wall Mounting with Corner Mount
The corner mount must be used in conjunction with the wall mount bracket.
Items Needed:
•
Dome Camera
•
Wall Mount Bracket Accessory
•
Corner Mounting Plate
•
Waterproof Gasket (supplied)
•
Screws and Anchors
appropriate for the mounting
surface (not supplied)
Tools Needed:
•
Drill
•
Screwdriver
Installation:
1. Cut a cable access hole
on the wall. Cables can
also be threaded
through the cable entry
knockout on the bracket
if desired.
2. Secure the corner
mount plate on the
corner wall with the
appropriate screws and
screw anchors.
3. Attach the wall mount
bracket to the corner mount plate with the supplied screws and washers.
4. Thread the cables through wall mount bracket and the top holder.
5. Block the cable entry hole with the supplied sponge.
6. Attach the waterproof gasket to the wall mount bracket.
7. Attach the top holder to the wall mount bracket with the supplied screws and
washers and adjust the gasket to the junction of the wall mount bracket and the
top holder.
8. Connect the cables to the dome camera.
9. Attach the dome to the top holder and secure them with the supplied screw.