beautypg.com

Control page – Nortec Remote Interface User Manual

Page 19

background image

Web Interface | 15

Table 5: Advanced Settings

Advanced settings
Parameter

Description

Ground Leak prevent

When “On” the contactor will be disengaged whenever the drain valve is
activated to prevent current leakage to the drain. (Default = Off).

Conductivity fill stop

When activated during a fill cycle the fill valve will be turned off when current
equals 95% of demand to prevent overshooting the demand. (Default = Off).

OverCurrent factor

Adjust only if instructed by NORTEC Representative. (Default = 0.00)

Figure 10: Features Page

Control Page

The control page presents parameters that relate to the humidistats, sensors and all
modulating controls that affect the humidifier. There are 3 main categories: Basic Parameters,
Multi Unit Operation, and Unit Controls. A table describing the parameters and values is
outlined below.